Three-way Lucifer Solenoid Valve Guide

Three-Way Lucifer Solenoid Valve Guide

This is the valve guide body for a Lucifer-style three-way solenoid, the nucleus, base, and the two flange o-rings (F_252). Note this fits Lucifer-brand coils only. Parker-Hannifin bought the Lucifer solenoid division years ago, so current coils are stamped "Parker" even though some still carry a raised "Lucifer" embossing on top; either way, they use the original Lucifer part numbers and are only compatible with Lucifer-pattern valve guides like this one.

Not sure which solenoid style you have? Check the solenoid valve breakdown before ordering.

SPECIFICATIONS

• Valve type: 3/2 way, normally closed, direct acting
• Orifice size: 1.5 mm
• Seal material: Ruby
• Body material: CW510L brass (UNI EN 12165)
• Port type: sub-base (flanged), 32 x 32 mm
• Operating pressure: 0–10 bar AC/DC
• Fluid temperature range: -10°C to 140°C
• Media: air, water, steam
• Meets NSF169 / 1935/2004/CE

COMPATIBILITY

• Fits: Lucifer-brand coils only (including current Parker-Hannifin coils using Lucifer numbering)
• Replaces: Ascaso C..166, Bezzera 7703001, LF 1120334, Nuova Ricambi 700176, Parker 471017, Pavoni 450001/451261, Grimac AS116, Spaziale 00626
• Works with: F_252 flange o-rings (included) and Lucifer/Parker coils

INSTALLATION

Best left to a technician, solenoid valve guides require correct flange o-ring seating and coil torque to avoid leaks.

PRO TIPS

• Don't mix and match: a Parker-branded coil that isn't Lucifer-pattern will physically fit but won't seal correctly on this guide. If your old coil has no raised "Lucifer" lettering under the Parker label and the numbers don't match the cross-reference list above, verify before you order.